COPIED
7 mins

REBUILDING TURKEY

Along with its neighbour Syria, Turkey is now counting the cost of the huge earthquakes that have left thousands dead and many more homeless. Neil Gerrard reports on the disaster

Houses damaged by the earthquake in Elazig, Turkey
PHOTO: MEHMET VIA ADOBE STOCK

It’s now over three months since two earthquakes in rapid succession devastated parts of Turkey and neighbouring Syria. And yet the scale of the disaster is still difficult to truly comprehend. On a human level, the death toll is estimated at around 51,000 people, of which around 45,000 were in Turkey. Meanwhile, millions more have been left uprooted across a 200-mile-long path of destruction.

The earthquakes have also destroyed hundreds of thousands of buildings. In fact, recent estimates have put the number of buildings either destroyed or severely damaged at more than 200,000.

Following the disaster, Turkish president Recep Tayyip Erdoğan pledged, “We will build better buildings in the place of those which collapsed. We will win hearts and we will unroll a new future in front of our people.”

Ambitious targets

The government has promised to build a total of 488,000 homes across the region affected by the earthquake within a year, in a highly ambitious programme.

Taking charge of the effort is the Ministry of Environment, Urbanization and Climate Change, led by environment and urbanisation minister Murat Kurum.

Meanwhile, Turkey’s housing authority TOKİ is the mandated agency for the reconstruction effort in the affected cities.

It has been reported that over 133,000 houses across ten provinces built by TOKİ, which undertakes public housing projects for low-income citizens, did not suffer any structural damage.

Mevlüt Kahraman is director of construction and technical works at Bilkent University at Ankara. While Ankara itself was largely unaffected by the quakes, Kahraman visited Malatya five days after they occurred to assess the site of a school construction he is overseeing there. He also travelled on to Adıyaman to assess the damage there, which he described as “terrible”.

“My observation of the region is that most of the buildings that have damage or collapsed had very few shear walls. The construction quality was mostly low,” he says.

But he agrees that TOKİ’s buildings are generally resistant to earthquakes. That is because they are built using a tunnel formwork system, which allows them to perform well in areas prone to high seismic risk.

The multi-storey reinforced concrete buildings rely on a high number of shear walls to resist lateral loads and carry vertical loads.

It is this method of construction that the Turkish government has pledged to employ in the reconstruction of homes, coupled with geological and ground survey studies.

Kahraman asserts that tunnel form construction is a proven technology and one that Turkey’s construction industry is already familiar with, having used it for 40 years.

Meanwhile Mike Mieler, senior risk and resilience engineer at Arup recommended that construction companies move away from unreinforced masonry infill walls, which are commonly used in reinforced concrete framed structures in Turkey in interior and exterior partition walls.

In a LinkedIn post, Mieler, who is currently assessing damage in the area, noted that such walls often crack and crumble in an earthquake and pose a serious risk to safety.

While acknowledging that the technique won’t go away soon, some in Turkey’s construction industry have already taken note, with the developers of a base-isolated hospital opting to replace infill walls with steel frame partitions.

Very large areas with multifloor apartment buildings were completely destroyed

Damage beyond expectations

It’s understandable that the desire to rebuild quickly is strong, but the scale of the challenge is huge given the extensive damage.

Dr Mete Basar Baypinar is assistant professor in the department of urban and regional planning at Istanbul University.

“In Antakya, very large areas with multifloor apartment buildings were completely destroyed or heavily damaged,” he says.

Baypinar has previously led a Disaster and Climate Change Resilience and Urban Transformation Capacity Development project for the World Bank, focusing on the area. He has also been part of the university’s ongoing work on urban resilience planning in Osmaniye. “I already knew the area was quite vulnerable. But the devastation, for example in Kahramanmaraş, far exceeded my expectations,” he says.

“The sheer number of housing projects promised by government as well as some opposition parties do not really seem to be possible, given bottlenecks regarding construction materials, particularly aggregates,” he says.

He also notes that high prices due to energy costs and logistical problems in the earthquake area add to the challenge.

Careful planning required

Kahraman emphasises the need for careful planning ahead of reconstruction.

“All construction disciplines – city planners, landscape architects, interior architects and engineers – need to be involved. Speed is important but planning should be even more so,” he says.

Not only will many buildings require reconstruction, but infrastructure, like drinking water and wastewater systems, will probably have to be completely overhauled.

Building densities, land use and transport connections are all likely to change as a result of the reconstruction and that means that power networks will also have to be rebuilt.Authorities will also need to consider safe power storage options in case of future disasters because relief efforts were hampered by a lack of energy after February’s earthquakes.

A 15-storey building with 60 units in Malatya, which has suffered medium to heavy damage. It is likely to be demolished but experts advocate retrofitting where appropriate
PHOTO: MEVLÜT KAHRAMAN

Baypinar also recommends changes to the region’s transport systems, which historically have run on the fault lines. “The resilience of transport infrastructure and terminals remains a key issues for this resource-rich and competitive industrial and agricultural region,” he says.

“In general, the region lacked strong mass transportation systems and mostly relied on ageing bus and minibus fleets. We had been working on more sustainable and accessible mass transport systems before the disaster and were trying to secure international financial support.”

Retrofitting and zoning

Official assessments of buildings in the earthquake-hit region have suggested that up to 232,000 buildings – around 30% of the existing building stock – will have to be demolished. Baypinar points out that a good proportion of buildings were probably not completely illegally built but had multiple issues regarding compliance to building codes, as well as dangerous additions or removal of structural components due to adaptation, misuse or lack of adequate maintenance.

“Unfortunately, the high rate of informal buildings puts pressure on governments. Owners and occupiers make multiple additions to enlarge their usage space, either because they cannot afford to buy larger houses, or just because such attempts remain rewarded rather than punished,” says Baypinar.

“Zoning has become weaker and weaker in Turkey, where many units in residential buildings have been converted to discount supermarkets, cafes and other retail units.

“Many of these activities, which were regarded as 'safe' by the Directive for Opening and Licensing of Workplaces, have become deadly as columns were removed from buildings to accommodate them. So, not only has construction been an issue, but managing the buildings and coupling with zoning has become an issue.”

A TOKİ building stands undamaged in Malatya following the earthquakes

Kahraman recommends adding new shear walls to existing buildings, depending on their condition. He also advocates column jacketing combined with concrete or fibre composite materials around damaged columns where appropriate.

Adding fibre composite materials to strengthen unreinforced infill walls in existing buildings is also an option that should be considered. “If the building is suitable, we can also use steel elements combined with carbon fibre materials. But some government agencies are not warm to the idea of retrofitting and prefer new construction,” he adds.

A destroyed building in the Turkish province of Kahramanmaras
IMAGE: HASAN VIA ADOBE STOCK

Costs and funding

At the end of February the World Bank estimated the cost of direct physical damage in Turkey at US$34.2 billion (€31 billion).

But it also acknowledged that the final recovery and construction cost will be much larger – potentially twice as large.

Baypinar expects central and municipal governments to be able to raise more funds from the World Bank, European Union, the EU Solidarity Fund and other sources.

But he expects that the country will need funds not only to rebuild buildings and infrastructure but to ramp up production and transportation of construction materials.

And he warns against rushed projects in the aftermath of the earthquake. “Most experts are busy now in damage assessment or assessment of vulnerability of present buildings in larger cities, so there is very little capacity left for adequate construction quality controls at the moment.”

He concludes, “I believe that if Turkey can demonstrate that it can handle the process of post-disaster recovery and development planning, apply risk-based land use planning and zoning management, introduce stricter codes for quality controls during construction processes, apply a thorough check of present building stocks, and develop emergency action plans, more and more funds would easily flow here.

“We also have to find innovative and creative ways to decrease costs arising from materials and bottlenecks in professional services. For example, the introduction of hybrid buildings where wood or other materials are used modularly could be a good short-term solution perhaps. But these have to be studied rapidly under given market conditions.”

This article appears in May-June 2023

Go to Page View
This article appears in...
May-June 2023
Go to Page View
TOP OF THE TABLE
EDITOR Andy Brown andy.brown@khl.com +44 (0)1892 786224 It
JCB’S EXPANDED ELECTRIC POWEPACK OPTIONS
JCB is expanding its electric powerpack range with
IN CASE YOU MISSED IT
Munich in Germany is the fifth most expensive
WHAT’S NEXT?
A lot of the growth for OEMs and
KENGO KUMA TO DESIGN VISITOR CENTRE FOR ALBANIN WORLD HERITAGE SITE
PHOTOS COURTESY OF KKAA Kengo Kuma & Associates
A MORE STABLE (AND GREENER) INDUSTRY
Construction in China has followed the path of the wider economy – tremendous highs followed by deep lows. However, discovers Andy Brown, the extreme nature of the industry could be a thing of the past and transitions to a greener construction economy are well under way
INFRASTRUCTURE LEASA THE CHARGE
When the construction economy slows, China typically boosts spending on infrastructure – with over 10,000 infrastructure projects launched throughout the economy China has tuned to this tactic again, reports
SALES HOLDING FIRM
Sales for the world’s top construction equipment manufacturers remains resilient despite challenges
WORKING ALL ANGLES TO A SUSTAINABLE FUTURE
Jason Conklin, senior vice president, Caterpillar, with responsibility for Global Construction and Infrastructure talks to Andy Brown about electric power, automation, and sustainability
FROM THE EDITOR
It has been an uncomfortable past couple of
CONTENTS
5 D&RI ONLINE Some of the industry stories
In case you missed it…
Some of the stories currently online at www.demolitionandrecycling.media
Reaching for the next level
D&Ri talks to Miguel Lambert, president of USA-based recycling company Repurpose Aggregates, about recent developments at his company, including working with Northern Irish wet processing specialist CDE.
A whole new challenge...
We take a look at what material passports mean for demolition and recycling and how the industry in responding.
Monitoring developments
From new product names to next generation products, there is a lot happening in excavators and loaders just now.
Future project three years in the making
A look at how crushers are making a difference in two very different environments, starting with SBM Mineral Processing’s Remax 600 impact crusher and the autonomous crushing that it is working towards.
A first in recycling
Why United Kingdom-based recycling specialist Collard Group chose a Terex Recycling Systems installation
At last– a long awaited return
D&Ri looks ahead to two major shows for our sector taking place in the coming weeks – Plantworx in the United Kingdom and Steinexpo in Germany
Toronto calling for WDS 2023
All the latest news as the industry prepares for its 15th annual gathering.
Connecting with the demolition industry is always worthwhile
As the International Media Partner of the European Demolition Association (EDA), Demolition & Recycling International brings you the latest EDA news in a dedicated part of the magazine.
Where in the world will we go next?
Richard Vann, managing director, RVA Group, discusses international opportunities in the demolition industry.
GLOBAL ROADBUILDING MILSTONE
Roads play a crucial role in the development and growth of modern society and their construction and maintenance have become more ambitious with the help of new technology and techniques, reports Catrin Jones
REBUILDING TURKEY
Along with its neighbour Syria, Turkey is now counting the cost of the huge earthquakes that have left thousands dead and many more homeless. Neil Gerrard reports on the disaster
IT'S NOT ALL-ELECTRIC
MIKE HAYES looks at the power technology for construction equipment that may – or may not – be replacing diesel in the coming years
HIGHLIGHTS
CONSTRUCTION ‘EMBRACING TECH AT UNPRECEDENTED RATES’ A new
NEW TOPCON SOFTWARE AIMS FOR GREATER DIGITAL ADOPTION IN CONSTRUCTION
US-based technology company Topcon Positioning Systems has launched
FERROVIAL’S NEW AI ASSISTANT TO WRITE MESSAGES AND ANALYSE DOCUMENTS FOR ITS EMPLOYEES
Contractor Ferrovial has launched a new generative artificial
KOMATSU ANNOUNCES MID-SIZED HYDROGEN EXCAVATOR CONCEPT
Komatsu has announced the development of a medium-sized
EUROPE’S LARGEST 3D-PRINTED BUILDING UNDER CONSTRUCTION
German construction company Kraus Gruppe is using a
TRANSFORMING CONSTRUCTION
Rich Humphrey from Bentley Systems tells Andy Brown how construction can take its next step on the tech journey
BUILDING IN THE ANTARCTIC
What’s it like to build in one of the most remote places in the world where the temperature can be -35 oC (-31 oF)? Neil Gerrard finds out
POWERING
Electrification is happening across construction and the drilling and foundations sector is no exception, but the journey has only just begun, reports Catrin Jones
SOARING HIGH
FACEBOOK PAGE PHOTO: FOUR FRANKFURT, PHOTO: @SKYLINEATLAS _EN/TWITTER
Looking for back issues?
Browse the Archive >

Previous Article Next Article
May-June 2023
CONTENTS
Page 74
PAGE VIEW