COPIED
7 mins

SALES HOLDING FIRM

Sales for the world’s top construction equipment manufacturers remains resilient despite challenges

Construction equipment manufacturers have faced an unusual situation over the last few years – they’ve had to contend with issues such as rising materials and labour costs, a lack of workers, and supply chain issues, while the demand for their products has, in many cases, never been as strong.

This year’s Yellow Table – which compiles the sales figures for the world’s top 50 OEMs – is looking at sales for 2022. It follows last year’s table, which saw the top 50 OEMs on the list generate the most money in the history of the Yellow Table. It is fairly impressive that in this year’s table there’s not been much change in the amount of dollars generated; the total amount is US$230.6 billion, just 0.4% less than last year’s US$232.7 billion. Regarding equipment sales, 2022 saw a couple of big changes from 2021. The first occurred in China; when equipment sales dropped in most of the world due to the impact of the pandemic, they actually rose in China in 2020 and remained high in 2021 due to stimulus spending. However, the drying up of this, aligned with the country’s zero-Covid policy hampered business and sales fell fairly sharply for most OEMs in this market in 2022.

What balanced this out is that sales improved in most other major markets. Europe saw growth as did India and North America – with this region performing very strongly, with industry experts Off-Highway Research estimating that equipment sales were up 8%. This strength is illustrated by the company – once again – taking the top spot in the list, Caterpillar.

Top ten

Sales for Cat’s construction and resources division increased from US$32 billion in the last table to US$37 billion with the gap between it and second-placed Komatsu, and the rest of the table, increasing further. Komatsu saw its sales decline slightly when adjusted for currency calculations and XCMG remained in third position, meaning that the top three are unchanged from last year.

METHODOLOGY

Positions in the Yellow Table are based on sales in the 2022 calendar year in US Dollars. Currencies have been converted to Dollars based on the average exchange rate over the course of 2022 to try and ensure fairness. Data was gathered from a variety of sources including audited accounts, company statements and reputable third-party sources. In Japan, India, and certain other countries, the use of the fiscal year (ending 31 March) has made it impossible to establish calendar year information. In these cases, fiscal year results were used. In some cases International Construction has made an estimate of revenues based on historical data and industry trends. Where this has occurred, it has been clearly marked with two asterixs’. While every effort has been made to ensure this report’s information is accurate, International Construction does not accept any liability for errors or omissions. If you would like to comment on the Yellow Table, or feel your company should be included, please e-mail the editor at: andy.brown@khl.com

SHARE OF YELLOW TABLE REVENUES

Revenues generated in the Yellow Table from firms in Asia have fallen from over half of the total amount last year (50.2%) to 44.8%. It can be argued this is a healthier figure for the industry as it means that it is not so heavily dependent on one region.

The main reason for this decline is China, which saw the revenue generated by its OEMs drop to 18.2%. North America sees an increase from 23.2% to 27.2%, helped by the strong showing of Caterpillar and John Deere, which is now the fourth largest OEM. Europe saw a marginal increase from last year’s percentage of 26.3% to 27.5%. Europe has four companies in the top ten: Volvo CE at six, Liebherr at seven, Sandvik at nine and JCB at ten.

Please note that these figures represent the revenues of the companies listed on the Yellow Table, and are therefore not representative of the revenues generated within the regions themselves or individual countries as a whole.

China-based OEMs have been increasingly focused on expanding their sales in overseas markets and this strategy enabled XCMG to hold onto third position – just – from John Deere, but Sany slip one place to fifth, overtaken by John Deere. Since the acquisition of the Wirtgen Group Deere has been steadily climbing the table over the last few years. Volvo CE is the highest European-placed company in the table, with the OEM remaining in sixth position.

Liebherr climbed to seventh place (they also increased their placing by one last year) and are followed by companies that climb one place: Hitachi Construction Machinery, Sandvik and JCB. The UK-based company returns to the top ten with the uptick in India, the largest market for JCB, helping to boost sales. These companies all rise one place in part due to China-based Zoomlion dropping from seventh position last year to number 12 on the list. This is a fairly steep drop, but it should be noted that the OEM has risen rapidly on the table in the last few years.

Movers and shakers

Some of the best performing OEMs are those that have a focus on specific products.

Oshkosh Access Equipment (JLG) is up four places, the biggest rise on this year’s table and China-based CRCHI, which specializes in tunnelling, maintains its position despite the falling Chinese market. Last year saw a fairly large change in the Yellow Table as, due to Hyundai Heavy Industries’ purchase of Doosan Infracore it became Hyundai Doosan Infracore and a subsidiary of the new Hyundai Genuine group, of which Hyundai Construction Equipment is also a subsidiary. Hyundai Doosan Infracore has since been rebranded as Develon. As Doosan Bobcat is continuing to operate as an independent business it was listed as a ‘new entry’ on the last table at number 14.

The compact specialist is performing strongly and rose to just one place outside the top ten on this table. If the sales for sister companies Develon and Hyundai Construction Equipment were combined then they would be 12th on the table. There is one new entry onto the table, Hidromek. The Turkey-based OEM has been on the list before and only narrowly did not make the top 50 last year. The OEM that just misses out this year (the 51st company) is Chinese access manufacturer, Sinoboom.

SALES REMAIN REMARKABLY STRONG

The last table was the first since the world, generally, emerged from lockdowns due to the Covid-19 pandemic and therefore it was expected that sales would rise. The sheer scale of the rise, to the highest figure ever recorded on the Yellow Table was a bit more surprising. It is therefore impressive that this year’s table sees just a 0.4% decline in sales from this record amount. It is likely that in next year’s table sales will decline again, and by more than 0.4%.

This doesn’t mean that construction will have a bad year, just that the previous years’ levels are unsustainable. OEMs are still reporting strong order books and governments around the world are continuing to invest in infrastructure projects – some on a truly huge scale. Supply chain issues and worries over spiralling inflation are genuine concerns, as is the increasingly fractured nature of geopolitical relations, but the demand for the products made by OEMs is not going anywhere.

Even a drop of several percentage points in next year’s table would still mean, when looked at from the wider historical perspective, that the sector had performed very well.

What’s next?

In all likelihood, a slight decline in next year’s Yellow Table. The construction industry has been extremely robust to ride the waves of the global pandemic, war in Ukraine, inflationary issues and a lack of skilled workers. That this year’s Yellow Table is only 0.4% down from the largest ever figure recorded on the table is an indication of how strong 2022 actually was.

Equipment sales around the world are predicted to drop by around 7% in 2023 but the total volume of machines is still expected to be above the one million units mark. At the time of writing, OEMs have released financial results for the first quarter that were broadly positive, with order books still strong.

A lot depends on China – the market is expected to see further declines in 2023 but at what level remains to be seen. The country is continuing to invest in infrastructure as are other economies around the world, which is fuelling demand for equipment. Any decline in sales for the Yellow Table will likely be ‘soft’ and come from a position of real strength. iC

This article appears in May-June 2023

Go to Page View
This article appears in...
May-June 2023
Go to Page View
TOP OF THE TABLE
EDITOR Andy Brown andy.brown@khl.com +44 (0)1892 786224 It
JCB’S EXPANDED ELECTRIC POWEPACK OPTIONS
JCB is expanding its electric powerpack range with
IN CASE YOU MISSED IT
Munich in Germany is the fifth most expensive
WHAT’S NEXT?
A lot of the growth for OEMs and
KENGO KUMA TO DESIGN VISITOR CENTRE FOR ALBANIN WORLD HERITAGE SITE
PHOTOS COURTESY OF KKAA Kengo Kuma & Associates
A MORE STABLE (AND GREENER) INDUSTRY
Construction in China has followed the path of the wider economy – tremendous highs followed by deep lows. However, discovers Andy Brown, the extreme nature of the industry could be a thing of the past and transitions to a greener construction economy are well under way
INFRASTRUCTURE LEASA THE CHARGE
When the construction economy slows, China typically boosts spending on infrastructure – with over 10,000 infrastructure projects launched throughout the economy China has tuned to this tactic again, reports
SALES HOLDING FIRM
Sales for the world’s top construction equipment manufacturers remains resilient despite challenges
WORKING ALL ANGLES TO A SUSTAINABLE FUTURE
Jason Conklin, senior vice president, Caterpillar, with responsibility for Global Construction and Infrastructure talks to Andy Brown about electric power, automation, and sustainability
FROM THE EDITOR
It has been an uncomfortable past couple of
CONTENTS
5 D&RI ONLINE Some of the industry stories
In case you missed it…
Some of the stories currently online at www.demolitionandrecycling.media
Reaching for the next level
D&Ri talks to Miguel Lambert, president of USA-based recycling company Repurpose Aggregates, about recent developments at his company, including working with Northern Irish wet processing specialist CDE.
A whole new challenge...
We take a look at what material passports mean for demolition and recycling and how the industry in responding.
Monitoring developments
From new product names to next generation products, there is a lot happening in excavators and loaders just now.
Future project three years in the making
A look at how crushers are making a difference in two very different environments, starting with SBM Mineral Processing’s Remax 600 impact crusher and the autonomous crushing that it is working towards.
A first in recycling
Why United Kingdom-based recycling specialist Collard Group chose a Terex Recycling Systems installation
At last– a long awaited return
D&Ri looks ahead to two major shows for our sector taking place in the coming weeks – Plantworx in the United Kingdom and Steinexpo in Germany
Toronto calling for WDS 2023
All the latest news as the industry prepares for its 15th annual gathering.
Connecting with the demolition industry is always worthwhile
As the International Media Partner of the European Demolition Association (EDA), Demolition & Recycling International brings you the latest EDA news in a dedicated part of the magazine.
Where in the world will we go next?
Richard Vann, managing director, RVA Group, discusses international opportunities in the demolition industry.
GLOBAL ROADBUILDING MILSTONE
Roads play a crucial role in the development and growth of modern society and their construction and maintenance have become more ambitious with the help of new technology and techniques, reports Catrin Jones
REBUILDING TURKEY
Along with its neighbour Syria, Turkey is now counting the cost of the huge earthquakes that have left thousands dead and many more homeless. Neil Gerrard reports on the disaster
IT'S NOT ALL-ELECTRIC
MIKE HAYES looks at the power technology for construction equipment that may – or may not – be replacing diesel in the coming years
HIGHLIGHTS
CONSTRUCTION ‘EMBRACING TECH AT UNPRECEDENTED RATES’ A new
NEW TOPCON SOFTWARE AIMS FOR GREATER DIGITAL ADOPTION IN CONSTRUCTION
US-based technology company Topcon Positioning Systems has launched
FERROVIAL’S NEW AI ASSISTANT TO WRITE MESSAGES AND ANALYSE DOCUMENTS FOR ITS EMPLOYEES
Contractor Ferrovial has launched a new generative artificial
KOMATSU ANNOUNCES MID-SIZED HYDROGEN EXCAVATOR CONCEPT
Komatsu has announced the development of a medium-sized
EUROPE’S LARGEST 3D-PRINTED BUILDING UNDER CONSTRUCTION
German construction company Kraus Gruppe is using a
TRANSFORMING CONSTRUCTION
Rich Humphrey from Bentley Systems tells Andy Brown how construction can take its next step on the tech journey
BUILDING IN THE ANTARCTIC
What’s it like to build in one of the most remote places in the world where the temperature can be -35 oC (-31 oF)? Neil Gerrard finds out
POWERING
Electrification is happening across construction and the drilling and foundations sector is no exception, but the journey has only just begun, reports Catrin Jones
SOARING HIGH
FACEBOOK PAGE PHOTO: FOUR FRANKFURT, PHOTO: @SKYLINEATLAS _EN/TWITTER
Looking for back issues?
Browse the Archive >

Previous Article Next Article
May-June 2023
CONTENTS
Page 23
PAGE VIEW