A milestone year for EDA

EDA President Stefano Panseri with Dejan Bojović, President of the Serbian Demolition Association, at the EDA Convention in Belgrade.

About the EDA

The European Demolition Association (EDA) was founded in 1978 and is the European platform for national demolition associations, demolition contractors and suppliers. It organises annual events to bring together the demolition industry from all over Europe. The most important one is the Annual Convention, a meeting that includes technical presentations about key topics as well as optional leisure activities. The EDA represents thousands of companies through its national associations and direct memberships. Demolition & Recycling International is the international media partner of the EDA.

■ For more details, please visit: www.europeandemolition.org

EDA Convention: Speaker spotlight

While this year’s EDA Annual Convention in Belgrade kicked off with a day of workshops, expert presentations on the second day of the convention provided attendees with a wealth of knowledge.

Key among them was a presentation delivered by expert environmental consultant and bio-geoscientist Marianne Hedberg Miljobygge, who provided insight into the handling and treatment of hazardous substances.

Shining the spotlight on the importance – but often overlooked – impact that insulation has on the earth’s Ozone layer, Marianne referenced the 1989 international Montreal Protocol on Ozone Depleting Substances and its 2016 update, which bans the production and use of chlorofluorocarbons (CFCs) and hydrofluorocarbons (HFCs) and other manmade chemicals (greenhouse gases) used in refrigerants, insulating foams and air-conditioning.

When CFC compounds are released into the atmosphere they make their way up into the earth’s stratosphere, and start to react with the Ozone.

Ozone (O3) is a highly reactive gas made up of three oxygen atoms, that protects the planet from the ultraviolet radiation in space. When CFCs and HFCs mix with the Ozone, they break down the O3 into oxygen (O2), which does not filter out the ultraviolet radiation from space.

“But the CFCs are just a catalyst,” said Marianne. “They take part in the reaction, in the splitting of the O3 into O2, and then go off to the next reaction. And the next reaction, and the next and so on.

“This is why CFCs are so damaging. The compound will eventually break down, but not quickly. If fact, not for 100 years,” she said.

“So whatever was whatever CFCs were produced in the 1970s are still up there, reacting with our Ozone layer”.

HOW DEMOLITION CONTRACTORS SHOULD HANDLE INSULATION

So, what does this mean for demolition, decommissioning and decontamination contractors when dealing with insulation? Marianne explained that “at the time when each piece of insulation was created, it was done by taking the material - polyurethane, for example, and blowing [inflating] it up with a CFC gas.

Environmental consultant and bio-geoscientist Marianne Hedberg Miljobygge, speaking at the EDA Annual Convention in Belgrade, Serbia.

“And whatever CFC gas was used, still remains in the material’s pores today. Even though it may have been produced in the 1970s or earlier.”

“So, you can see that we have a bit of a problem with this insulation because it is still in many structures around the world. To take care of these materials we need special understanding.”

Marianne added that when any insulation containing material, such as insulated piping, sandwich boards and refrigeration products, are cut, torn or crushed on work sites during the demolition and sorting processes, these CFCs are released into the atmosphere.

She said: “It might be tempting to take metal-covered foam insulation, sandwich boards and other items and send it to a metal scrap dealer, and to get something [money] for it.”

“But then the material is crushed in open air. And what happens to the gas is contained within the insulation and foams? They go up into the stratosphere and destroy the ozone layer.

PREVENTION IS BETTER THAN CURE

To prevent this, Marianne said that demolition contractors must seek out and utilise the services of special recyclers that have the appropriate equipment and permits to safely separate the recyclables from the insulation materials, prior to their incineration.

“This is where the regulations may seem a little bit costly, because the machinery that handles the insulation has to be enclosed in an airtight space.

“Then the pressure of that space has to be reduced to prevent explosions and fire, and after that the material can be crushed.

“Solid, reusable material is then taken out for all recycling - a very high percentage can be recovered. And the hazardous gas can be taken care of by being condensed into a fluid state that can then be sent for destruction.

“It has to be incinerated at 1,200 degrees Celsius or above,” Marianne explained, “Otherwise it will just pass through the process.”

SPECIALIST WASTE MANAGEMENT

“If you send your waste insulation material to just an ordinary recycler or waste management company, the incineration temperature utilised usually only goes up to 850 degrees Celsius, and that is not enough to destroy this hazardous substance.

“So, this is why we need contractors to use proper plants that can handle these materials. These plants must have the appropriate permit to be able to do this.”

Currently, the European Environmental Agency estimates that only 10% of CFC and HFC containing insulation materials are dealt with in the proper manner, suggesting it could be a key growth area for recyclers.